Cars / Vans · ECU Remapping
Alfa Romeo Spider 2.4 JTDm 200 hp Tuning (2006–)
Factory specification and Stage 1 remap gains for the Alfa Romeo Spider 2.4 JTDm 200 hp (2006–). A Stage 1 calibration adds 50 BHP and 85 Nm — software only, no hardware modifications required.
| Measure | Stock | ECO | Stage 1 | Stage 2 |
|---|---|---|---|---|
Power BHP | 200 | 230 +30 BHP · +15% | 250 +50 BHP · +25% | 245 +45 BHP · +23% |
Torque Nm | 400 | 450 +50 Nm · +13% | 485 +85 Nm · +21% | 500 +100 Nm · +25% |
+50 BHP
Stage 1 power gain
+85 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 200 bhp · 400 Nm (peak)
Stage 1: 250 bhp · 485 Nm (peak)
Stage 2: 245 bhp · 500 Nm (peak)
Tuning tool compatibility
This ECU is listed in 4 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: Bosch EDC16C39 (K-Line)
Alientech KESS3
Supported
ECU: Bosch EDC16C39 (K-Line)
Magicmotorsport FLEX
Supported
ECU: Bosch EDC16C39 (K-Line)
Dimsport New Genius / New Trasdata
Supported
ECU: Bosch EDC16C39 (K-Line)
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Alfa Romeo Spider 2.4 JTDm 200 hp Stage 1 — what changes
The Alfa Romeo Spider 2.4 JTDm 200 hp (2006–) leaves the factory at 200 BHP and 400 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.4 JTDm 200 hp powertrain (diesel). The result is 250 BHP and 485 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Alfa Romeo Spider 2.4 JTDm 200 hp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.4 JTDm 200 hp to 250 BHP and 485 Nm — a gain of 50 BHP and 85 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Alfa Romeo Spider's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.