Cars / Vans · ECU Remapping
Audi A6 3.0 TDI 245 hp Tuning (2011–)
Factory specification and Stage 1 remap gains for the Audi A6 3.0 TDI 245 hp (2011–). A Stage 1 calibration adds 55 BHP and 120 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 | Stage 2 |
|---|---|---|---|
Power BHP | 245 | 300 +55 BHP · +22% | 310 +65 BHP · +27% |
Torque Nm | 500 | 620 +120 Nm · +24% | 640 +140 Nm · +28% |
+55 BHP
Stage 1 power gain
+120 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 245 bhp · 500 Nm (peak)
Stage 1: 300 bhp · 620 Nm (peak)
Stage 2: 310 bhp · 640 Nm (peak)
Tuning tool compatibility
This ECU is listed in 4 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: Bosch EDC17CP04 · Bosch EDC17CP44 · Bosch MD1CP004
Alientech KESS3
Supported
ECU: Bosch EDC17CP44
Magicmotorsport FLEX
Supported
ECU: Bosch EDC17CP44 · Bosch EDC17CP04
Dimsport New Genius / New Trasdata
Supported
ECU: Bosch EDC17CP44
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Audi A6 3.0 TDI 245 hp Stage 1 — what changes
The Audi A6 3.0 TDI 245 hp (2011–) leaves the factory at 245 BHP and 500 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 3.0 TDI 245 hp powertrain (diesel). The result is 300 BHP and 620 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Audi A6 3.0 TDI 245 hp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 3.0 TDI 245 hp to 300 BHP and 620 Nm — a gain of 55 BHP and 120 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Audi A6's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.