Cars / Vans · ECU Remapping
Audi RS4 2.9 TFSI V6 Ed 25th 470 hp Tuning (2017–)
Factory specification and Stage 1 remap gains for the Audi RS4 2.9 TFSI V6 Ed 25th 470 hp (2017–). A Stage 1 calibration adds 40 BHP and 180 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 | Stage 2 |
|---|---|---|---|
Power BHP | 470 | 510 +40 BHP · +9% | 530 +60 BHP · +13% |
Torque Nm | 600 | 780 +180 Nm · +30% | 830 +230 Nm · +38% |
+40 BHP
Stage 1 power gain
+180 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 470 bhp · 600 Nm (peak)
Stage 1: 510 bhp · 780 Nm (peak)
Stage 2: 530 bhp · 830 Nm (peak)
Tuning tool compatibility
This ECU was not found in the manufacturer compatibility databases we cross-reference.
AutoTuner
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Alientech KESS3
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Magicmotorsport FLEX
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Dimsport New Genius / New Trasdata
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Audi RS4 2.9 TFSI V6 Ed 25th 470 hp Stage 1 — what changes
The Audi RS4 2.9 TFSI V6 Ed 25th 470 hp (2017–) leaves the factory at 470 BHP and 600 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.9 TFSI V6 Ed 25th 470 hp powertrain (petrol). The result is 510 BHP and 780 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Audi RS4 2.9 TFSI V6 Ed 25th 470 hp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.9 TFSI V6 Ed 25th 470 hp to 510 BHP and 780 Nm — a gain of 40 BHP and 180 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Audi RS4's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.