Cars / Vans · ECU Remapping
Ford Escape 2.0 Turbo ST 246 bhp Tuning (2013–2019)
Factory specification and Stage 1 remap gains for the Ford Escape 2.0 Turbo ST 246 bhp (2013–2019). A Stage 1 calibration adds 38 BHP and 63 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 |
|---|---|---|
Power BHP | 246 | 284 +38 BHP · +15% |
Torque Nm | 361 | 424 +63 Nm · +17% |
+38 BHP
Stage 1 power gain
+63 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 246 bhp · 361 Nm (peak)
Stage 1: 284 bhp · 424 Nm (peak)
Tuning tool compatibility
This ECU is listed in 3 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: MED172
Alientech KESS3
Supported
ECU: MED172
Magicmotorsport FLEX
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Dimsport New Genius / New Trasdata
Supported
ECU: MED172
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Ford Escape 2.0 Turbo ST 246 bhp Stage 1 — what changes
The Ford Escape 2.0 Turbo ST 246 bhp (2013–2019) leaves the factory at 246 BHP and 361 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.0 Turbo ST 246 bhp powertrain (petrol). The result is 284 BHP and 424 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Ford Escape 2.0 Turbo ST 246 bhp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.0 Turbo ST 246 bhp to 284 BHP and 424 Nm — a gain of 38 BHP and 63 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Ford Escape's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.