Cars / Vans · ECU Remapping
Mazda Mazda 6 2.5 Skyactiv-G 194 hp Tuning (2018–)
Factory specification and Stage 1 remap gains for the Mazda Mazda 6 2.5 Skyactiv-G 194 hp (2018–). A Stage 1 calibration adds 13 BHP and 24 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 | E85+ |
|---|---|---|---|
Power BHP | 194 | 207 +13 BHP · +7% | 207 +13 BHP · +7% |
Torque Nm | 258 | 282 +24 Nm · +9% | 282 +24 Nm · +9% |
+13 BHP
Stage 1 power gain
+24 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 194 bhp · 258 Nm (peak)
Stage 1: 207 bhp · 282 Nm (peak)
Tuning tool compatibility
This ECU is listed in 4 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: PYFB
Alientech KESS3
Supported
ECU: PYFB
Magicmotorsport FLEX
Supported
ECU: PYFB
Dimsport New Genius / New Trasdata
Supported
ECU: PYFB
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Mazda Mazda 6 2.5 Skyactiv-G 194 hp Stage 1 — what changes
The Mazda Mazda 6 2.5 Skyactiv-G 194 hp (2018–) leaves the factory at 194 BHP and 258 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.5 Skyactiv-G 194 hp powertrain (petrol). The result is 207 BHP and 282 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Mazda Mazda 6 2.5 Skyactiv-G 194 hp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.5 Skyactiv-G 194 hp to 207 BHP and 282 Nm — a gain of 13 BHP and 24 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Mazda Mazda 6's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.