Cars / Vans · ECU Remapping
Mercedes ML 350 (3.5i) 272 hp Tuning (2005–)
Factory specification and Stage 1 remap gains for the Mercedes ML 350 (3.5i) 272 hp (2005–). A Stage 1 calibration adds 23 BHP and 30 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 | Stage 2 | E85+ |
|---|---|---|---|---|
Power BHP | 272 | 295 +23 BHP · +8% | 310 +38 BHP · +14% | 295 +23 BHP · +8% |
Torque Nm | 350 | 380 +30 Nm · +9% | 399 +49 Nm · +14% | 380 +30 Nm · +9% |
+23 BHP
Stage 1 power gain
+30 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 272 bhp · 350 Nm (peak)
Stage 1: 295 bhp · 380 Nm (peak)
Stage 2: 310 bhp · 399 Nm (peak)
Tuning tool compatibility
This ECU is listed in 4 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: Bosch ME9.7
Alientech KESS3
Supported
ECU: Bosch ME9.7
Magicmotorsport FLEX
Supported
ECU: Bosch ME9.7
Dimsport New Genius / New Trasdata
Supported
ECU: Bosch ME9.7
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Mercedes ML 350 (3.5i) 272 hp Stage 1 — what changes
The Mercedes ML 350 (3.5i) 272 hp (2005–) leaves the factory at 272 BHP and 350 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 350 (3.5i) 272 hp powertrain (petrol). The result is 295 BHP and 380 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Mercedes ML 350 (3.5i) 272 hp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 350 (3.5i) 272 hp to 295 BHP and 380 Nm — a gain of 23 BHP and 30 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Mercedes ML's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.