Cars / Vans · ECU Remapping
Skoda Octavia 2.0 TSI VRS 242 bhp Tuning (2020–present)
Factory specification and Stage 1 remap gains for the Skoda Octavia 2.0 TSI VRS 242 bhp (2020–present). A Stage 1 calibration adds 78 BHP and 124 Nm — software only, no hardware modifications required.
| Measure | Stock | Stage 1 |
|---|---|---|
Power BHP | 242 | 320 +78 BHP · +32% |
Torque Nm | 370 | 494 +124 Nm · +34% |
+78 BHP
Stage 1 power gain
+124 Nm
Stage 1 torque gain
Rolling road
Dyno Graph
Power (BHP, solid) and torque (Nm, dashed) across engine speed (RPM). Peak figures match our database exactly.
Hover / touch the graph
Stock: 242 bhp · 370 Nm (peak)
Stage 1: 320 bhp · 494 Nm (peak)
Tuning tool compatibility
This ECU is listed in 3 of 4 manufacturer compatibility databases.
AutoTuner
Supported
ECU: Continental Simos19.6
Alientech KESS3
Supported
ECU: Continental Simos 19.6
Magicmotorsport FLEX
Supported
ECU: Continental SIMOS19.6
Dimsport New Genius / New Trasdata
Not listed in this manufacturer's data — ask us, coverage updates frequently.
Existing customers upload their ECU file via the Regal Tuning File Portal. New to Regal? Request a quote first.
About this remap
Skoda Octavia 2.0 TSI VRS 242 bhp Stage 1 — what changes
The Skoda Octavia 2.0 TSI VRS 242 bhp (2020–present) leaves the factory at 242 BHP and 370 Nm of torque. Manufacturers deliberately detune this engine to separate it from more expensive variants in the range — a Regal Tuning Stage 1 calibration safely recovers that headroom through the ECU alone: no hardware changes, no dyno risk, fully reversible.
Fuelling, boost pressure, ignition and torque limiters are optimised within the safe tolerances of the 2.0 TSI VRS 242 bhp powertrain (petrol). The result is 320 BHP and 494 Nm with factory smoothness, cold-start protection and emissions behaviour retained.
Why Regal Tuning
Verified on the dyno, backed by 20+ years
Every calibration is developed and verified by Regal Tuning on an in-house 4WD dynamometer and proven across a worldwide dealer network. Your file is supplied through the Regal Tuning file portal with full technical support, and the original factory file is always kept so the vehicle can be returned to stock at any time.
Figures shown are for this exact engine variant. Gains depend on vehicle health, fuel quality and conditions — we confirm the expected output for your specific vehicle in writing before work begins.
Skoda Octavia 2.0 TSI VRS 242 bhp remap FAQ
How much power does Stage 1 add?
Stage 1 takes the 2.0 TSI VRS 242 bhp to 320 BHP and 494 Nm — a gain of 78 BHP and 124 Nm over stock.
Is Stage 1 safe for this engine?
Yes — software-only calibration within the safe mechanical tolerances of the engine, gearbox and drivetrain, developed and verified on our in-house 4WD dyno.
How do I get this remap?
Request a quote with your vehicle details or registration. Existing customers upload their ECU file through the Regal Tuning file portal for a fast turnaround.
20+ years of ECU calibration
Ready to unlock your Skoda Octavia's real performance?
Tell us your vehicle and registration — we'll confirm support and the exact expected gains for your engine before any work begins.